Tag Holders for Flourish® MeshPanels (Set of 50)

I originally came up with the idea for these tag holders because I wanted an easy way to attach clean, professional-looking price tags to the Flourish® MeshPanels in my own art fair booth. I created the initial prototype, then worked with a local 3D-printing company to develop and refine the design through several rounds of prototypes until we got it just right.

Each tag holder is 3D printed locally in Wichita, KS and made to order. Please allow up to one week for your order to be produced and shipped.

IMPORTANT – PLEASE CHECK YOUR BOOTH WALLS

These tag holders are designed specifically for the white Flourish® MeshPanels  https://www.flourishdisplays.com/meshpanel_features

They are NOT designed for mesh tarps or other lightweight mesh wall systems. So please make sure you have the correct style of mesh panel before ordering.

I do not accept returns or refunds on these since they are made to order. So it is your responsibility to make sure that you are purchasing these for the correct type of art booth wall. These tag holders do not work on mesh walls that you need something sharp to pierce them. The end of the tag holders that goes through the mesh panel is dull and rounded. This works perfectly well with the white Flourish® MeshPanels but will not work for the cheaper mesh tarps available on Amazon.

HOW TO USE THEM

Attach the tag holder to your mesh panel and add your own tag to the flat surface.

I recommend using Velcro dots to attach your tags because they make it easy to remove or change tags throughout the show season. Velcro is not included with the tag holders. Velcro dots I use (Amazon affiliate link) https://link.amazon/B04DCrN3W

You could also experiment with removable sticky tack or double-sided tape if you prefer. Any adhesive you choose should be tested with your particular tag material first.

MAKING YOUR TAGS

My favorite method is to:

1. Design and print the tags on paper.
2. Laminate them.
3. Cut them to size.
4. Attach them to the holders using Velcro dots.

This creates a clean, professional tag that can be reused from show to show.

Don't have a laminator? You can also make your tags from heavy cardstock, very thick paper, or poster board and handwrite or print your information. I recommend using a sturdy material rather than ordinary paper. Thin paper can curl or warp from humidity and changing weather conditions at outdoor art fairs.

USE THEM FOR SMALL SIGNS TOO

These aren't limited to price tags! You can also use them to attach small informational signs to your mesh panel walls.

I've tested them for tags and smaller signs, but I have not tested them with large or heavy signage, so I don't recommend using them to support larger signs.

Check out the videos on this page to see how I use the holders in my own art fair booth and how I make my tags.

PLEASE NOTE: Tag holders only. Velcro, tags, signs, and mesh panels are not included.

Flourish® and MeshPanels® are trademarks of their respective owner. These tag holders are independently designed and produced and are not manufactured, sponsored, endorsed, or sold by Flourish.